Parts on group :
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | H185579 | [1] | SET OF BELTS | 2, Belt, Drive |
| 2. | H273334 | [1] | SHEAVE | driven, clutch |
| 3. | H756684 | [2] | ROLLER BEARING | SEAL - sheave |
| 4. | 219-1 | [2] | LUBE NIPPLE,1/8" - 27 NPTF | |
| 5. | H362541 | [2] | WASHER | thrust, 1-13/32 ID x 2-3/4 inch OD |
| For installation on #5 & #6 use the following info: | ||||
| Prior to 1987 it could have 6 on the bearing side and 1 on the clutch side. | ||||
| After 1987, the diesel had 1 on each side and the gas had 3 on the bearing side and 1 on the clutch | ||||
| If in doubt, reinstall same number as you disassembled. | ||||
| Quantity and arrangement of Ref. 5 and 6 will vary due to production year and also will be different | ||||
| 6. | H34579 | [7] | WASHER | thrust, 1-3/8 ID x 2-3/8 inch OD |
| For installation on #5 & #6 use the following info: | ||||
| Prior to 1987 it could have 6 on the bearing side and 1 on the clutch side. | ||||
| After 1987, the diesel had 1 on each side and the gas had 3 on the bearing side and 1 on the clutch | ||||
| If in doubt, reinstall same number as you disassembled. | ||||
| Quantity and arrangement of Ref. 5 and 6 will vary due to production year and also will be different | ||||
| H546812 | [1] | CLUTCH | trencher, Incl. Ref. 7 - 27 | |
| 7. | H547323 | [1] | PLATE ASSY. | HUB AND BACK PLATE - clutch |
| 8. | H111161 | [1] | AXLE PIN | hub, hub |
| 9. | H111260 | [6] | VALVE SPRING | releasing, clutch |
| 10. | H111245 | [1] | PLATE | driving, driving, clutch, set of 2 |
| 11. | H111252 | [1] | PLATE ASSY. | floating, clutch |
| H529362 | [1] | YOKE | UNIVERSAL JOINT YOKE adjusting, Incl. Ref. 12 - 17 | |
| 12. | NSS | [1] | NOT SOLD SEPARAT | YOKE - adjusting |
| 13. | H111179 | [4] | LEVER | yoke |
| 14. | H111187 | [4] | AXLE PIN | clevis, finger |
| 15. | H111195 | [1] | AXLE PIN | adjusting lock, adjusting lock |
| 16. | A26944 | [1] | VALVE SPRING | adjusting lock pin |
| 17. | A43382 | [4] | PIN, SPLIT (COTTER) | PIN, COTTER 1/8 x 1/2 inch long, special, pin retaining |
| H547315 | [1] | SLEEVE CYLINDER | sliding, Incl. Ref. 18 - 22 | |
| 18. | B50846 | [1] | SLEEVE | sliding |
| 19. | F11937 | [8] | DRAG LINK | finger |
| 20. | H111229 | [4] | AXLE PIN | clevis, Serial Range: link-sleeve |
| 21. | F11938 | [4] | AXLE PIN | clevis, Serial Range: link-finger |
| 22. | A43382 | [8] | PIN, SPLIT (COTTER) | PIN, COTTER 1/8 x 1/2 inch long, special, pin retaining |
| A31140 | [1] | COLLAR | clutch sleeve, Incl. Ref. 23 - 27 | |
| 23. | NSS | [2] | NOT SOLD SEPARAT | COLLAR - sleeve |
| 24. | 414-628 | [2] | BOLT,Hex, 3/8" - 24 x 1-3/4", Gr 5 | hex, 3/8 NF x 1-3/4 inch |
| 25. | D48341 | [4] | WASHER | |
| 26. | 131-1103 | [2] | LOCK NUT,3/8"-24, GA | NUT, LOCK, 3/8"-24, GA |
| 27. | NSS | [UAR] | NOT SOLD SEPARAT | SPACER - collar |
| REF # 27 = THE SHIMS ARE NO LONGER INCLUDED IN A31140 COLLAR ASSEMBLY...TWIN DISC HAS CHANGED DESIGN | ||||
| 28. | 219-55 | [1] | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | Special short |
