CONTROLLER - MOUNTING (PILOT CONTROL) CHASSIS EPC CNH CASE online

Pos.	Part No	Qty	Parts name	Comments
1.	87568437	[1]	WING NUT	If Used
1.	273890	[1]	THUMB SCREW,#10 - 32 x 3/4"	If Used
2.	87647723	[1]	COVER
3.	236535A1	[1]	CLIP,ELECTRICAL	If Used
3.	87301324	[1]	NUT,Spring, M5 x 0.8	Spring Multi-Thd; If Used
4.	87647720	[1]	CONSOLE	Console, LH
5.	87556251	[9-14]	SCREW,Hex, 1/4" - 20 x 3/4"	Hex Head 1/4-20 X 3/4 in.
6.	87568426	[1]	BOOT	LH
7.	323238	[2]	THIN NUT,Hex, M12, 1.75mm Pitch, Cl 05
8.	87739659	[1]	FOAM INSULATION	Secondary Seal, LH; Replaces 87646402
9.	87568427	[1]	BOOT	RH
10.	87647719	[1]	CONSOLE	Console, RH
11.	87739658	[1]	FOAM INSULATION	Secondary Seal, RH; Replaces 87646401
12.	L11541	[6]	CABLE TIE,203.2mm L, Nylon	CABLE STRAP
13.	87725336	[1]	BRACKET	Console Bracket, RH
14.	87571936	[1]	HARNESS	Interlock/Float; If Used
14.	87476478	[1]	HARNESS	Interlock/Float; If Used
15.	86637998	[4]	CLAMP,38.1mm, Coat, 10.3mm Bolt Hole, P Type
16.	86505868	[6]	SERRATED NUT,Hex, M8 x 1.25, Cl 8
17.	87725339	[1]	BRACKET	Console Bracket, LH
18.	291308	[AR]	SEALING STRIP,0.75" W x 0.5" Thick	1036mm (40 13/16 in.) Required
19.	9706704	[4]	BOLT,Hex, M10 x 1.5 x 41.58mm, Cl 8.8	If Used
19.	87758381	[4]	SCREW,1"	BUTTON SOCKET HD M10X40 10.9 ZND; If Used
20.	86624176	[8]	WASHER,11mm ID x 20mm OD x 2mm Thk
22.	603022	[2]	CLAMP,44.4mm, Coat, 10.3mm Bolt Hole, P Type
23.	43127	[2]	BOLT,Hex, M8 x 1.25 x 25mm, Cl 8.8
24.	291809	[AR]	SEALING STRIP	0.3 FT Required
25.	86625144	[1]	SNAP RING,#18, Ext	If Used