Parts on group :
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| R20724 | [1] | VALVE | CONTROL VALVE ASSEMBLY - transmission, Includes: Ref. #s 1 - 22 | |
| 1. | 193-511 | [12] | HEX SOC SCREW,Sems, 1/4"-28 x 5/8" | SCREW AND WASHER - 1/4"-28 NF x 2-5/8" |
| 2. | R21384 | [1] | COVER | - rear |
| 3. | 35665 | [2] | GASKET | - rear cover |
| 4. | 71125 | [2] | SPRING | - spool |
| 5. | 74916 | [2] | SPOOL | - brake |
| 6. | NSS | [1] | NOT SOLD SEPARAT | BODY - valve |
| 7. | 221-1042 | [1] | PLUG | - slotted, 1/4" NPT, plated |
| 8. | 221-849 | [2] | PLUG,Hex Soc, 1/8"-27 | - hex socket, 1/8" NPT |
| 9. | 71141 | [2] | ROD | - push, brake spool |
| 10. | G107659 | [3] | ROD | SPOOL ASSEMBLY - shift, retaining ring groove is 3/64" (1.19 mm) wide, if used, Includes: Ref |
| 10A. | 71144 | [1] | RING | RETAINING RING - shift spool, 3/64" (1.19 mm) wide, if used Ref. #10 spool only, if used |
| 11. | G107659 | [3] | ROD | SPOOL ASSEMBLY - shift, retaining ring groove is 4/64" (1.68 mm) wide, if used, Includes: Ref. |
| 11A. | G107637 | [1] | RING, SNAP | RETAINING RING - shift spool, 4/64" (1.68 mm) wide, used with Ref. #11 spool only, if used |
| 12. | NSS | [1] | NOT SOLD SEPARAT | COVER ASSEMBLY - front, shift spool hole opening is 13/16" (21 mm) diameter, no longer availa |
| 12A. | G104207 | [1] | COVER | ASSEMBLY - front, shift spool hole opening is 1-1/8" (28 mm) diameter, Includes: Ref. # 13 - 14 |
| 13. | 71121 | [3] | WIPER SEAL,15.88mm ID x 20.78mm OD x 2.74mm Thk | U-CUP SEAL - shift spool, 13/16" (21 mm) OD, used with Ref. #12 cover only, if used |
| 13A. | G105700 | [3] | OIL SEAL | - double lip, shift spool, 1-1/8" (28 mm) OD, used with Ref. #12A cover only, if used |
| 14. | 51200266 | [15] | SEAL | - rod, small, lower, used with both cover assemblies 2 |
| 15. | A50455 | [2] | HOUSING | - piston, Includes: Ref. #16 |
| 16. | 71121 | [1] | WIPER SEAL,15.88mm ID x 20.78mm OD x 2.74mm Thk | - piston housing |
| 17. | 71131 | [2] | RING | O-RING - square section, piston |
| 18. | A50457 | [2] | PISTON | - brake |
| 19. | 131-407 | [3] | LOCK NUT,Pal, 3/8" - 16, 0.145" High | NUT - hex, self-locking, oval point, 3/8"-16 NC x 1/2" sealant coated |
| 21. | 71119 | [3] | SPRING | - detent |
| 22. | 71120 | [3] | VALVE | PIN - spool detent |
