LOADER BUCKET CONTROL CHASSIS/ATTACHMENTS EPC CNH CASE online

580SK CASE SUPER-K CONSTRUCTION KING LOADER BACKHOE (3/96-12/96) CHASSIS/ATTACHMENTS

LOADER BUCKET CONTROL CNH CASE Parts scheme diagram

Parts on group :

Pos.	Part No	Qty	Parts name	Comments
1.	D149220	[1]	SHAFT	control, loader bucket, see Figure 9-002, Ref. 4, for lever
2.	413-848	[1]	BOLT,Hex, 1/2" - 13 x 3", Gr 5	hex, 1/2 NC x 3 inch
3.	495-11053	[1]	WASHER,1/2", SAE	(17/32" x 1-1/16" x 5/64") 1/2", SAE
4.	D149292	[1]	SPACER	SLEEVE rod mounting hardware
6.	131-208	[1]	SPECIAL NUT,1/2"-13	NUT heavy hex, self-locking, 1/2 inch NC
7.	495-81182	[UAR]	WASHER,21/32" x 1 1/4" x .060"	flat, 21/32 x 1-1/4 x 3/64 inch, use as a spacer
7.	495-81184	[UAR]	WASHER,21/32" x 1 1/2" x .030"	flat, 21/32 x 1-1/2 x 1/32 inch, use as a spacer
8.	413-616	[4]	BOLT,Hex, 3/8" - 16 x 1", Gr 5	hex, 3/8 NC x 1 inch
9.	L15401	[2]	BEARING,15.89mm ID	pivot
10.	492-11038	[4]	LOCK WASHER,3/8"
11.	425-106	[4]	NUT,3/8"-16, Cl 5
12.	D136773	[1]	BALL JOINT	JOINT ball, 3/8 inch NF, female, replaces S108030 ball joint
13.	413-620	[1]	BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5	hex, 3/8 NC x 1-1/4 inch
14.	492-11038	[2]	LOCK WASHER,3/8"
15.	425-106	[2]	NUT,3/8"-16, Cl 5
16.	425-116	[1]	NUT,3/8" - 24, Gr 5	- hex, 3/8 inch NF
17.	D144606	[1]	BALL JOINT	JOINT ball, 3/8 inch NF
18.	D149299	[1]	LEVER	bucket control, see Figure 9-002, Ref. 12, for lift and bucket control shaft
19.	219-55	[1]	LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF	NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg
20.	D149025	[2]	BUSHING	- lever
21.	495-81293	[2]	WASHER,1.53" ID x 2.06" OD x 0.11" Thk	flat, 1-17/32 x 2-1/16 x 1/8 inch
22.	D149361	[2]	SPACER	lever, models with two-spool valve
23.	495-81204	[2]	WASHER,1 9/32" x 2" x .036"	flat, 1-9/32 x 2 x 1/32 inch
24.	103-16125	[2]	SNAP RING,#125, Ext	Ring, Snap, , Lever (Replaces D26918) #125, Ext
25.	D149297	[1]	PITMAN	ROD lift, lever to bucket section, see Figure 9-008, Ref. 25, for rollback control rod
26.	432-610	[2]	COTTER PIN,3/32" x 5/8"	PIN, SPLIT (COTTER), 3/32" x 5/8"
27.	495-21038	[1]	WASHER,5/16"	(flat, 3/8 x 7/8 x 5/64") 5/16"
28.	413-624	[1]	BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5	hex, 3/8 NC x 1-1/2 inch
29.	495-11066	[1]	WASHER,5/8", SAE	flat, 21/32 x 1-5/16 x 3/32 inch