HYDRAULIC CIRCUIT - SWING CYLINDER - BACKHOE BOOM - SIDESHIFT VERSION, 580SLE CGG0160030- HYDRAULICS EPC CNH CASE online

580SLE CASE LOADER BACKHOE (S/N CGG0160030 & AFTER) (4/97-12/01) HYDRAULICS

HYDRAULIC CIRCUIT - SWING CYLINDER - BACKHOE BOOM - SIDESHIFT VERSION, 580SLE CGG0160030- CNH CASE Parts scheme diagram

Parts on group :

Pos.	Part No	Qty	Parts name	Comments
1.	1542827C1	[1]	CYLINDER ASSY.	114x190mm, Right, See Figure 08-305
2.	177511A1	[1]	CYLINDER ASSY.	114x190mm, Left, See Figure 08-307
3.	218-5106	[4]	90 ELBOW,90 Degree Elbow, 3/4" - 16 Male JIC x 3/4" - 16 Male ORB	Consists of Ref. Number 4
4.	237-6008	[1]	O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro
5.	236333A1	[1]	HYDRAULIC HOSE
6.	191141A1	[2]	HOSE	390 mm (15-3/8 in)
7.	236335A1	[1]	HOSE
8.	218-5121	[6]	ELBOW,90 Degree Elbow, 3/4" - 16 Male JIC x 7/8" - 14 Male ORB	Consists of Ref. Number 9
9.	237-6010	[1]	O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro
10.	REF	[1]	INSTRUCTION	Valve, Sequence, See Figure 08-195
11.	218-5060	[1]	HYD CONNECTOR,3/4" - 16 Male JIC x 7/8" - 14 Male ORB	Consists of Ref 12
12.	237-6010	[1]	O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro
13.	197129A1	[1]	HOSE	1300 mm (51-1/4 in)
14.	196203A1	[1]	PIPE	Six Section Control Valve
14.	195762A1	[1]	PIPE	Seven Section Control Valve, Eight Section Control Valve
15.	119935A1	[1]	TEE
16.	218-5063	[1]	HYD CONNECTOR,7/8" - 14 Male JIC x 1-1/16" - 12 Male ORB	7/8 fl x 1-1/16 Or, Consists Of Ref. Number 17
17.	237-6012	[1]	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro
18.	218-5232	[1]	ELBOW,90 Degree, 7/8"-14, 37 Degree x 7/8"-14, 37 Degree Fem Sw
19.	195744A1	[1]	PIPE
20.	194672A1	[1]	HOSE	1225 mm (48-1/4 in)
21.	218-5119	[1]	ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 1-1/16" - 12 Male ORB
22.	237-6012	[1]	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro
23.	195742A1	[1]	PIPE
24.	197128A1	[1]	HOSE	1380 mm (54-3/8 in)
25.	191737A1	[1]	RESTRICTOR
26.	182222A1	[1]	FITTING
27.	892-11010	[2]	LOCK WASHER,M10
28.	614-10035	[2]	BOLT,Hex, M10 x 1.5 x 35mm, Cl 8.8, Full Thd
29.	REF	[1]	INSTRUCTION	Mounting Parts, See Figure 08-139