BLADES AND BLADE HOLDER (OFFSET PULL-TYPE) (SERIAL NO. -008500) [C21]
![BLADES AND BLADE HOLDER (OFFSET PULL-TYPE) (SERIAL NO. -008500) [C21] John Deere Parts scheme diagram](http://c1.a2109.com/jd2/w/wp26/wp2649_________un01jan94.png "BLADES AND BLADE HOLDER (OFFSET PULL-TYPE) (SERIAL NO. -008500) [C21] John Deere catalog part")
Parts on group BLADES AND BLADE HOLDER (OFFSET PULL-TYPE) (SERIAL NO. -008500) [C21]:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | H29619 | [4] | Lock Nut | TORQUE = 987 NM (728 LB.FT.) |
| 2. | W22221 | [4] | Washer | |
| 3. | W43051 | [4] | Blade | (A) (TOP BLADE FOR DUAL BLADE COMBINATION) (SUB FOR W34299 OR W39213) |
| 4. | W22223 | [4] | Spacer | |
| 5. | W34300 | [4] | Blade | (A) (HOOKED) |
| 6. | W44235 | [2] | Blade | (A) (SUCTION, CW ROTATION) LENGTH = 460 MM (18.1") (SUB FOR W34296, W39202 OR W43044) |
| 6. | W44236 | [2] | Blade | (A) (SUCTION, CCW ROTATION) LENGTH = 460 MM (18.1") (SUB FOR W34297, W39203 OR W43044) |
| 7. | W20695 | [4] | Bolt | (USE WITH DUAL BLADES) |
| 8. | W22237 | [4] | Bolt | (USE WITH SINGLE BLADES) |
| 9. | 19H1862 | [2] | Cap Screw | 3/4" X 2-1/2" TORQUE = 407 NM (300 LB.FT.) |
| 10. | 12H236 | [2] | Lock Washer | 3/4" |
| 11. | W43049 | [4] | Blade | (A) (OFFSET/FLAT) (SUB FOR W34298 OR W39204) |
| 12. | AW23590 | [2] | Arm | LENGTH = 460 MM (18.1") (SUB AW27982, (2) W38134, (2) W38686, 19H3105 AND (2) 24M7237) (SUB FOR AW21722) |
| 13. | AW23324 | [2] | Guard | (WELD ON PART) |
![John Deere BLADE HOLDER, PAN AND BLADES (INTEGRAL AND CENTER PULL) (SERIAL NO. 008501- ) [C19] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp60/wp6090_________un05jul05.png "John Deere BLADE HOLDER, PAN AND BLADES (INTEGRAL AND CENTER PULL) (SERIAL NO. 008501- ) [C19] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere BLADES AND BLADE HOLDER (INTEGRAL AND CENTER PULL-TYPE) (SERIAL NO. -008500) [C17] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp26/wp2648_________un01jan94.png "John Deere BLADES AND BLADE HOLDER (INTEGRAL AND CENTER PULL-TYPE) (SERIAL NO. -008500) [C17] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere RIGHT-HAND GEAR CASE (1000 RPM) (OFFSET PULL-TYPE) [C15] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp23/wp2308_________un01jan94.png "John Deere RIGHT-HAND GEAR CASE (1000 RPM) (OFFSET PULL-TYPE) [C15] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere RIGHT-HAND GEAR CASE (540 RPM) (OFFSET PULL-TYPE) [C13] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp23/wp2309_________un01jan94.png "John Deere RIGHT-HAND GEAR CASE (540 RPM) (OFFSET PULL-TYPE) [C13] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere LEFT-HAND GEAR CASE (COVER AND OUTER GEAR CASE DRIVE SHAFT) (OFFSET PULL-TYPE) [C11] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp23/wp2307_________un01jan94.png "John Deere LEFT-HAND GEAR CASE (COVER AND OUTER GEAR CASE DRIVE SHAFT) (OFFSET PULL-TYPE) [C11] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere LEFT-HAND GEAR CASE (INPUT AND BLADE HOLDER SHAFTS) (OFFSET PULL-TYPE) [C09] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp12/wp1249_________un01jan94.png "John Deere LEFT-HAND GEAR CASE (INPUT AND BLADE HOLDER SHAFTS) (OFFSET PULL-TYPE) [C09] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere CENTER GEAR CASE (INTEGRAL AND CENTER PULL-TYPE) [C05] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp23/wp2306_________un01jan94.png "John Deere CENTER GEAR CASE (INTEGRAL AND CENTER PULL-TYPE) [C05] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere BLADE HOLDER, PAN AND BLADES (OFFSET PULL-TYPE) (SERIAL NO. 008501- ) [C23] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp26/wp2650_________un01jan94.png "John Deere BLADE HOLDER, PAN AND BLADES (OFFSET PULL-TYPE) (SERIAL NO. 008501- ) [C23] : 40 GEAR CASES AND BLADE HOLDERS")