LEFT-HAND OUTER GEAR CASE (INPUT GEAR AT REAR OF HOUSING) (SERIAL NO. -029600) [B24]
![LEFT-HAND OUTER GEAR CASE (INPUT GEAR AT REAR OF HOUSING) (SERIAL NO. -029600) [B24] John Deere Parts scheme diagram](http://c1.a2109.com/jd2/w/wp26/wp2691_________un01jan94.png "LEFT-HAND OUTER GEAR CASE (INPUT GEAR AT REAR OF HOUSING) (SERIAL NO. -029600) [B24] John Deere catalog part")
Parts on group LEFT-HAND OUTER GEAR CASE (INPUT GEAR AT REAR OF HOUSING) (SERIAL NO. -029600) [B24]:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | AW22394 | [1] | Knob | (SUB FOR AW21310 OR AW18284) |
| 2. | H35232 | [1] | Spring | |
| 3. | M82289 | [1] | Spring Pin | 3/16" X 1-1/4" |
| 4. | W24041 | [2] | Nut | |
| 5. | AW17177 | [1] | Cover | |
| 6. | R26375 | [1] | O-Ring | |
| 7A. | W36523 | [1] | Dipstick | (PLASTIC, NOT VENTED) (SUB AW26426 AND AW26640) |
| 7B. | AW26426 | [1] | Dipstick | (METAL, VENTED) (USE WITH AW26640) |
| 8. | 19H1905 | [4] | Cap Screw | 5/16" X 1" |
| 9. | 12H303 | [4] | Lock Washer | 5/16" |
| 10. | W28394 | [1] | Support | |
| 11. | W33325 | [1] | Channel | |
| 12. | 34H270 | [1] | Spring Pin | 5/32" X 1-1/2" |
| 13. | W34543 | [1] | Nut | |
| 14. | W23863 | [1] | Gear | 540 RPM (21 TOOTH) |
| 14. | W25357 | [1] | Gear | 1000 RPM (23 TOOTH) |
| 15. | JD9076 | [1] | Bearing Cone | |
| 16. | JD9133 | [1] | Bearing Cup | |
| 17. | JD8988 | [1] | Bearing Cone | |
| 18. | JD8271 | [1] | Bearing Cup | |
| 19. | W22424 | [AR] | Shim | 0.003", (SUB FOR W22425 OR W22426) |
| 20. | W31255 | [1] | Bearing Housing W/O Bearing | (SUB FOR W22415) |
| 21. | R41041 | [6] | Cap Screw | |
| 22. | AT33402 | [1] | Seal | (SUB FOR AW12807) |
| 23. | W26136 | [1] | Snap Ring | (NOT USED WITH W27619) |
| 24. | W22841 | [1] | Housing | |
| 25. | JD7418 | [1] | Bearing Cup | (USE WITH W27525) |
| 25. | JD9170 | [1] | Bearing Cup | |
| 26. | JD8969 | [1] | Bearing Cone | (USE WITH W27525) |
| 26. | JD9070 | [1] | Bearing Cone | |
| 27A. | W33200 | [1] | Shaft | (ALSO ORDER JD9070 AND JD9170) (SUB FOR W25343) |
| 27B. | W34585 | [1] | Shaft | (ALSO ORDER W34543, JD9070, JD9170 AND 34H270) (SUB FOR W27525 OR W32894) |
| 27C. | W34585 | [1] | Shaft | |
| 28. | AW25519 | [1] | Seal | (SUB FOR AW12808) |
| 29. | W29648 | [6] | Flange Nut | 3/4" |
| 30. | W29649 | [6] | Cap Screw | 3/4" X 2-1/4" (FLANGE) |
| 31A. | W27619 | [1] | Drive Shaft | (WITHOUT SLIP CLUTCH) |
| 31B. | W29939 | [1] | Drive Shaft | (WITH SLIP CLUTCH) |
| 31B. | W29939 | [1] | Drive Shaft | (WITH SLIP CLUTCH) |
| 32. | T14646 | [1] | Snap Ring | |
| 33. | W23862 | [1] | Gear | 540 RPM (29 TOOTH) |
| 33. | W25356 | [1] | Gear | 1000 RPM (21 TOOTH) |
| 34. | Q31451 | [1] | Washer | 1-9/32" X 2" X 0.138" |
| 35. | JD8187 | [1] | Bearing Cone | |
| 36. | JD8225 | [1] | Bearing Cup | |
| 37. | W31257 | [1] | Cap | |
| 38. | AW27472 | [1] | Gear Case | (B) (C) 540 RPM, (SUB FOR AW22336, AW25157 OR AW26658) |
| 38. | AW17932 | [1] | Housing | (A) 1000 RPM |
| 38. | AW25159 | [1] | Gear Case | (B) (C) 1000 RPM, (SUB FOR AW22337) |
| 38. | AW26659 | [1] | Gear Case | (C) 1000 RPM |
| 39. | 19H1833 | [1] | Cap Screw | 5/8" X 1-1/4" |
| 40. | GY2072W | [1] | Washer | |
| 41. | GY2001W | [1] | Shim | 0.005" |
| 41. | GY2180W | [1] | Shim | 0.003" |
| 42. | W31425 | [1] | Pipe Plug | (PLASTIC VENT PLUG) |
| 43A. | AW24408 | [1] | Cover | (SUB AW26426 AND AW26640) (SUB FOR AW17178) |
| 43B. | AW26640 | [1] | Cover | (USE WITH AW26426) |
| 44. | [1] | Gasket | USE "FORM-IN-PLACE GASKET" (SUB FOR W22427) |
![John Deere CENTER GEAR CASE COVER, SHIELD AND WING DRIVE HOUSINGS (540 AND 1000 RPM) [B22] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp24/wp2494_________un01jan94.png "John Deere CENTER GEAR CASE COVER, SHIELD AND WING DRIVE HOUSINGS (540 AND 1000 RPM) [B22] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere CENTER GEAR CASE, INPUT AND BLADE HOLDER SHAFTS (1000 RPM) [B20] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp12/wp1258_________un01jan94.png "John Deere CENTER GEAR CASE, INPUT AND BLADE HOLDER SHAFTS (1000 RPM) [B20] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere CENTER GEAR CASE, INPUT AND BLADE HOLDER SHAFTS (540 RPM) [B18] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp12/wp1257_________un01jan94.png "John Deere CENTER GEAR CASE, INPUT AND BLADE HOLDER SHAFTS (540 RPM) [B18] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere LEFT-HAND OUTER GEAR CASE (INPUT GEAR AT FRONT OF HOUSING) (SERIAL NO. 029601- ) [C01] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp24/wp2475_________un01jan94.png "John Deere LEFT-HAND OUTER GEAR CASE (INPUT GEAR AT FRONT OF HOUSING) (SERIAL NO. 029601- ) [C01] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere RIGHT-HAND OUTER GEAR CASE (INPUT GEAR AT FRONT OF HOUSING) (SERIAL NO. -029600) [C03] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp25/wp2560_________un01jan94.png "John Deere RIGHT-HAND OUTER GEAR CASE (INPUT GEAR AT FRONT OF HOUSING) (SERIAL NO. -029600) [C03] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere RIGHT-HAND OUTER GEAR CASE (INPUT GEAR AT REAR OF HOUSING) (SERIAL NO. 029601- ) [C05] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp26/wp2690_________un01jan94.png "John Deere RIGHT-HAND OUTER GEAR CASE (INPUT GEAR AT REAR OF HOUSING) (SERIAL NO. 029601- ) [C05] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere BLADE HOLDER AND BLADES (SERIAL NO. -022100) [C07] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp12/wp1276_________un01jan94.png "John Deere BLADE HOLDER AND BLADES (SERIAL NO. -022100) [C07] : 40 GEAR CASES AND BLADE HOLDERS")
![John Deere BLADE HOLDER, BLADES AND PAN ATTACHMENT (SERIAL NO. 022101- ) [C08] part catalog 40 GEAR CASES AND BLADE HOLDERS](http://c1.a2109.com/_350/jd2/w/wp51/wp5198_________un10mar03.png "John Deere BLADE HOLDER, BLADES AND PAN ATTACHMENT (SERIAL NO. 022101- ) [C08] : 40 GEAR CASES AND BLADE HOLDERS")