GEAR CASE [A11]
![GEAR CASE [A11] John Deere Parts scheme diagram](http://c1.a2109.com/jd2/w/w319/w3192__________un01jan94.png "GEAR CASE [A11] John Deere catalog part")
Parts on group GEAR CASE [A11]:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | W15621 | [1] | Spindle | (SUB FOR W14782) |
| 2. | [2] | Shaft Key | 5/16" X 5/16" X1-1/4" (CUT FROM H64375) | |
| 3. | AT10344 | [2] | Seal | |
| 4. | JD8988 | [1] | Bearing Cone | |
| 5. | JD8271 | [1] | Bearing Cup | |
| 6. | AW12471 | [1] | Housing | |
| 7. | 15H584 | [1] | Pipe Plug | 1/2" |
| 8. | W14793 | [1] | Gasket | |
| 9. | W14794 | [1] | Cover | |
| 10. | GY2357W | [4] | Screw | |
| 11. | E20434 | [1] | Pipe Plug | (SUB FOR W10123) |
| 12. | 11M7021 | [2] | Cotter Pin | 4 X 25 MM |
| 13. | 14H918 | [2] | Nut | 5/8" |
| 14. | W14783 | [2] | Washer | |
| 15. | W14785 | [1] | Pinion | |
| 16. | W14787 | [AR] | Shim | 0.003" (3 OR LESS USED) |
| 16. | W14788 | [AR] | Shim | 0.005" (2 OR LESS USED) |
| 16. | W14789 | [AR] | Shim | (SUB (2) W14788) 0.010" |
| 17. | JD8187 | [3] | Bearing Cone | |
| 18. | JD8225 | [3] | Bearing Cup | |
| 19. | W14786 | [1] | Gear | |
| 20. | W14790 | [1] | Shim | 0.003" (4 OR LESS USED) |
| 20. | W14791 | [1] | Shim | 0.005" (3 OR LESS USED) |
| 20. | W14792 | [1] | Shim | (SUB (2) W14791) 0.010" |
| 21. | AW12474 | [1] | Housing | |
| 22. | R40835 | [6] | Cap Screw | (SUB FOR AW12476) |
| 23. | AW12475 | [1] | Shaft | |
| 24. | 19H1768 | [4] | Cap Screw | 3/4" X 2" |
| 25. | 12H236 | [4] | Lock Washer | 3/4" |
| 26. | 14H1058 | [4] | Nut | 3/4" |
| 27. | W14767 | [1] | Shaft Key |
![John Deere SLIP CLUTCH [A10] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp45/wp4515_________un13jul01.png "John Deere SLIP CLUTCH [A10] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere REAR DRIVELINE AND SUPPORT BEARING FOR PULL-TYPE CUTTER [A09] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp55/wp5563_________un07apr04.png "John Deere REAR DRIVELINE AND SUPPORT BEARING FOR PULL-TYPE CUTTER [A09] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere FRONT DRIVELINE FOR PULL-TYPE CUTTER (540 OR 1000 RPM) [A08] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp55/wp5562_________un12apr04.png "John Deere FRONT DRIVELINE FOR PULL-TYPE CUTTER (540 OR 1000 RPM) [A08] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere DRIVELINE FOR INTEGRAL CUTTER (FOR TRACTORS WITH 1-3/8 INCH PTO) (540 OR 1000 RPM) [A07] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp55/wp5561_________un07apr04.png "John Deere DRIVELINE FOR INTEGRAL CUTTER (FOR TRACTORS WITH 1-3/8 INCH PTO) (540 OR 1000 RPM) [A07] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere DRIVELINE FOR INTEGRAL CUTTER (FOR TRACTOR WITH 1-1/8 INCH PTO) (540 RPM) [A06] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp55/wp5558_________un07apr04.png "John Deere DRIVELINE FOR INTEGRAL CUTTER (FOR TRACTOR WITH 1-1/8 INCH PTO) (540 RPM) [A06] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere BLADE HOLDER AND BLADES [A13] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w416/w4162__________un01jan94.png "John Deere BLADE HOLDER AND BLADES [A13] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere FRAME [A14] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w236/w2363__________un01jan94.png "John Deere FRAME [A14] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere HITCH AND BRACES FOR INTEGRAL CUTTER [A15] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp55/wp5564_________un07apr04.png "John Deere HITCH AND BRACES FOR INTEGRAL CUTTER [A15] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere QUIK-COUPLER ADAPTER PARTS, INTEGRAL CUTTER [A16] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w425/w425___________un01jan94.png "John Deere QUIK-COUPLER ADAPTER PARTS, INTEGRAL CUTTER [A16] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere DEPTH STOP AND MAST BRACKET FOR 800 SERIES HITCH [A17] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp55/wp5565_________un08apr04.png "John Deere DEPTH STOP AND MAST BRACKET FOR 800 SERIES HITCH [A17] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere TAIL WHEEL, AXLE AND SUPPORT FOR INTEGRAL CUTTER [A18] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w236/w2362__________un01jan94.png "John Deere TAIL WHEEL, AXLE AND SUPPORT FOR INTEGRAL CUTTER [A18] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere HITCH FOR PULL-TYPE CUTTER (REAR MOUNTED WHEELS) [A19] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp55/wp5582_________un12apr04.png "John Deere HITCH FOR PULL-TYPE CUTTER (REAR MOUNTED WHEELS) [A19] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")
![John Deere HITCH FOR PULL-TYPE CUTTER (SIDE MOUNTED WHEELS) [A20] part catalog 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp55/wp5583_________un13apr04.png "John Deere HITCH FOR PULL-TYPE CUTTER (SIDE MOUNTED WHEELS) [A20] : 205 (Integral) and (Pull-Type) Rotary Cutter, Gyramor")