GEAR CASE BLADE HOLDER SHAFT AND COVER [A19]
![GEAR CASE BLADE HOLDER SHAFT AND COVER [A19] John Deere Parts scheme diagram](http://c1.a2109.com/jd2/w/w376/w3766__________un01jan94.png "GEAR CASE BLADE HOLDER SHAFT AND COVER [A19] John Deere catalog part")
Parts on group GEAR CASE BLADE HOLDER SHAFT AND COVER [A19]:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | GY2357W | [4] | Screw | |
| 1. | 19H1900 | [4] | Cap Screw | 5/16" X 3/4" |
| 1. | 12H303 | [4] | Lock Washer | 5/16" |
| 2. | W31425 | [1] | Pipe Plug | (SUB FOR W10123) |
| 3. | W12147 | [1] | Dipstick | (SUB AW26426 METAL VENTED DIPSTICK AND 15H604 METAL PLUG) |
| 4. | W15819 | [1] | Cover | (SUB FOR W12202) |
| 5. | W15815 | [1] | Gasket | (SUB FOR W10223) |
| 6. | 19H1320 | [1] | Cap Screw | 5/8" X 1-1/4" |
| 7. | GY2072W | [1] | Washer | |
| 8. | GY2001W | [1] | Shim | 0.005" |
| 8. | GY2180W | [1] | Shim | 0.003" |
| 8. | GY2181W | [1] | Shim | 0.010", (SUB (2) GY2001W) |
| 9. | W10218 | [1] | Gear | (540 RPM) (21 TEETH) |
| 9. | W10217 | [1] | Gear | (1000 RPM) (29 TEETH) |
| 10. | GY2002W | [1] | Shim | 0.005" |
| 10. | GY2178W | [1] | Shim | 0.003" |
| 10. | GY2179W | [1] | Shim | 0.010", (SUB (2) GY2002W) |
| 11. | JD8122 | [1] | Bearing Cone | |
| 11. | JD8988 | [1] | Bearing Cone | |
| 12. | JD7441 | [1] | Bearing Cup | |
| 12. | JD8271 | [1] | Bearing Cup | |
| 13. | W22305 | [1] | Housing | (SUB FOR W14233) |
| 13. | W22278 | [1] | Housing | (SUB FOR W15298) |
| 14. | GY2125W | [4] | Washer | |
| 15. | K40016 | [1] | Lock Nut | |
| 16. | W14088 | [4] | Washer | |
| 17. | 19H1707 | [4] | Cap Screw | 3/4" X 2-3/4" |
| 18. | W22253 | [1] | Shaft Key | (SUB FOR W10225 OR W13603) |
| 19. | JD8224 | [1] | Bearing Cup | |
| 20. | JD7395 | [1] | Bearing Cone | |
| 21. | AW12808 | [1] | Seal | (SUB FOR GY2007W) |
| 22. | AW12813 | [1] | Shaft | (SUB FOR AW10093 AND AW12809) |
![John Deere GEAR CASE INPUT SHAFT [A18] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w376/w3765__________un01jan94.png "John Deere GEAR CASE INPUT SHAFT [A18] : 227 Rotary Cutter, Gyramor")
![John Deere SLIP CLUTCH [A16] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp25/wp2528_________un01jan94.png "John Deere SLIP CLUTCH [A16] : 227 Rotary Cutter, Gyramor")
![John Deere SHEAR PIN DRIVE [A15] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/5/5970/59707__________un01jan94.png "John Deere SHEAR PIN DRIVE [A15] : 227 Rotary Cutter, Gyramor")
![John Deere REAR DRIVELINE PULL-TYPE CUTTER (1000 RPM) [A14] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w376/w3764__________un01jan94.png "John Deere REAR DRIVELINE PULL-TYPE CUTTER (1000 RPM) [A14] : 227 Rotary Cutter, Gyramor")
![John Deere REAR DRIVELINE FOR PULL-TYPE CUTTER (540 RPM) [A12] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp25/wp2534_________un01jan94.png "John Deere REAR DRIVELINE FOR PULL-TYPE CUTTER (540 RPM) [A12] : 227 Rotary Cutter, Gyramor")
![John Deere FRONT DRIVELINE FOR PULL-TYPE CUTTER (1000 RPM) [A11] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp82/wp824__________un01jan94.png "John Deere FRONT DRIVELINE FOR PULL-TYPE CUTTER (1000 RPM) [A11] : 227 Rotary Cutter, Gyramor")
![John Deere FRONT DRIVELINE FOR PULL-TYPE CUTTER (540 RPM) [A10] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w576/w5763__________un01jan94.png "John Deere FRONT DRIVELINE FOR PULL-TYPE CUTTER (540 RPM) [A10] : 227 Rotary Cutter, Gyramor")
![John Deere DRIVELINE FOR INTEGRAL CUTTER (FOR TRACTORS WITH 1-3/8-INCH PTO SHAFT) [A08] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/wp82/wp823__________un01jan94.png "John Deere DRIVELINE FOR INTEGRAL CUTTER (FOR TRACTORS WITH 1-3/8-INCH PTO SHAFT) [A08] : 227 Rotary Cutter, Gyramor")
![John Deere BLADES, BLADE HOLDER AND SHREDDING ATTACHMENT [A20] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w376/w3767__________un01jan94.png "John Deere BLADES, BLADE HOLDER AND SHREDDING ATTACHMENT [A20] : 227 Rotary Cutter, Gyramor")
![John Deere FRAME [A21] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w185/w1855__________un01jan94.png "John Deere FRAME [A21] : 227 Rotary Cutter, Gyramor")
![John Deere WEAR SHOES [A22] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w107/w1076__________un01jan94.png "John Deere WEAR SHOES [A22] : 227 Rotary Cutter, Gyramor")
![John Deere HITCH AND BRACES FOR INTEGRAL CUTTER [A23] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w576/w5762__________un01jan94.png "John Deere HITCH AND BRACES FOR INTEGRAL CUTTER [A23] : 227 Rotary Cutter, Gyramor")
![John Deere TAIL WHEEL, HUB, AXLE AND SUPPORT FOR INTEGRAL CUTTER [A24] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w682/w6821f_________un01jan94.png "John Deere TAIL WHEEL, HUB, AXLE AND SUPPORT FOR INTEGRAL CUTTER [A24] : 227 Rotary Cutter, Gyramor")
![John Deere HITCH AND ADJUSTING CRANK FOR PULL-TYPE CUTTER [A25] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w376/w3761__________un01jan94.png "John Deere HITCH AND ADJUSTING CRANK FOR PULL-TYPE CUTTER [A25] : 227 Rotary Cutter, Gyramor")
![John Deere AXLE (PULL-TYPE CUTTER WITH SIDE MOUNT WHEELS) [B01] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w376/w3769__________un01jan94.png "John Deere AXLE (PULL-TYPE CUTTER WITH SIDE MOUNT WHEELS) [B01] : 227 Rotary Cutter, Gyramor")
![John Deere AXLE ADJUSTING CRANK (PULL-TYPE CUTTER WITH SIDE MOUNT WHEELS) [B02] part catalog 227 Rotary Cutter, Gyramor](http://c1.a2109.com/_350/jd2/w/w108/w1081__________un01jan94.png "John Deere AXLE ADJUSTING CRANK (PULL-TYPE CUTTER WITH SIDE MOUNT WHEELS) [B02] : 227 Rotary Cutter, Gyramor")