MAIN DRIVE
Parts on group MAIN DRIVE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | N167650 | [AR] | Screw | 7.925 X 19.050 MM |
| 2. | N10213 | [AR] | Lock Nut | 7.925 MM |
| 3. | M66125 | [2] | Pressed Flanged Housing | |
| 4. | JD8554 | [1] | Eccentric Locking Collar | (FOR PRODUCTION, THIS IS ONE PART; TWO PARTS USED IN SERVICE.) |
| 5. | JD8665 | [1] | Ball Bearing | (FOR PRODUCTION, THIS IS ONE PART; TWO PARTS USED IN SERVICE.) |
| 6. | N219568 | [1] | Angle | LH |
| 7. | AA49570 | [1] | Link Chain | (UPPER) (97 LINKS, TYPE 40) (MAKE FROM AL390N, AL391N AND (2) AL392N) |
| 8. | 34H316 | [2] | Spring Pin | 1/4" X 1-1/2" |
| 9. | AN213173 | [1] | Chain Sprocket | 34 TEETH |
| 10. | N218989 | [1] | Drive Shaft | (30 FOOT) (8' 2") LH |
| 10. | N280282 | [1] | Drive Shaft | (25 FOOT) (35 FOOT) (10' 9") LH (SUB FOR N219024) |
| 10. | N219028 | [1] | Pin | (1' 9") RH |
| 10. | N218987 | [1] | Drive Shaft | (30 FOOT) (35 FOOT) (7' 1") CENTER |
| 11. | AA49571 | [1] | Link Chain | (LOWER) (77 LINKS, TYPE 2040) (MAKE FROM AP19999, AP19998AP19994, AP19993 AND AP19995) |
| 12. | AN213172 | [1] | Chain Sprocket | LH AND RH (40 TEETH) (USE WITH 78 LINK CHAIN) |
| 12. | AN281229 | [1] | Chain Sprocket | 36 TEETH (USE WITH 77 LINK CHAIN) |
| 13. | E62934 | [1] | Flange Nut | 12.700 MM |
| 14. | M60966 | [1] | Idler | |
| 15. | 24H1226 | [1] | Washer | 1/2" X 1-1/4" X 0.083" |
| 16. | 19H1945 | [1] | Cap Screw | 1/2" X 3-1/4" |
| 17. | N218982 | [1] | Angle | (25 FOOT) (35 FOOT) |
| 18. | N10213 | [2] | Lock Nut | (25 FOOT) 7.925 MM |
| 19. | 34H331 | [1] | Spring Pin | (30 FOOT) 5/16" X 1-1/2" CENTER |
| 20. | N219571 | [1] | Clutch | (30 FOOT) (SUB N284030) |
| 20. | N284030 | [1] | Clutch | |
| 21. | N167331 | [1] | Tightener | |
| 22. | 19H1906 | [2] | Cap Screw | (25 FOOT) 5/16" X 1-1/2" |
Parts catalog 455 Series Folding Grain Drills (North American Edition):
LID AND SEED CHARTS
455 Series Folding Grain Drills (North American Edition) part catalog John Deere
