Grain Box Power Shaft And Drive Sprockets (Standard And Half Speed)
Parts on group Grain Box Power Shaft And Drive Sprockets (Standard And Half Speed):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | A36284 | [1] | Pin | |
| 1. | N281171 | [1] | Groove Pin | |
| 2. | JD7844 | [2] | Lubrication Fitting | 1/4" |
| 3. | N284026 | [1] | Clutch | (SUB FOR N162006) |
| 4. | N284079 | [1] | Compression Spring | (SUB FOR N161992) |
| 5. | N162043 | [1] | Washer | |
| 6. | AN160990 | [1] | Chain Sprocket | 15 AND 27 TOOTH (FERTILIZER DRIVE) |
| 7. | [1] | Link Chain | (46 LINKS, TYPE 41) (MAKE FROM AP20369, (2) AP20368 AND P28536 OR SW41OLUS) | |
| 8. | N280200 | [1] | Shaft | (SUB N281430 AND N281171) |
| 8. | N281430 | [1] | Pin Fastener | |
| 8. | N282560 | [1] | Shaft | |
| 9. | 34H288 | [1] | Spring Pin | 3/16" X 1-3/4" |
| 10. | N162009 | [1] | Chain Sprocket | 15-TOOTH (USE WITH GRASS SEED ATTACHMENT) |
| 11. | N163270 | [1] | Reinforcement | |
| 12. | N218415 | [1] | Sheet | (SUB FOR N216737) |
| 13. | M66125 | [2] | Pressed Flanged Housing | (SUB FOR L2287C) |
| 14. | JD8554 | [1] | Eccentric Locking Collar | W/ SET SCREW |
| 15. | JD8665 | [1] | Ball Bearing | |
| 16. | N10213 | [5] | Lock Nut | |
| 17. | N167650 | [2] | Screw | |
| 18. | 22H1077 | [1] | Set Screw | 1/4" X 5/16" |
| 19. | N161993 | [1] | Worm Gear | ACREMETER |
| 19. | N280813 | [1] | Worm Gear | WORM - ACREMETER |
| 20. | N112200 | [1] | Self-Locking Screw | (FERTILIZER DRIVE) |
| 21. | AN212682 | [1] | Idler | (FERTILIZER DRIVE) |
| 22. | 19H2127 | [2] | Cap Screw | 5/16" X 7/8" (SUB FOR M2136T, THIS APPLICATION) |
| 23. | 12M7065 | [2] | Lock Washer | 8 MM |
| 24. | N161579 | [1] | Spur Gear | 20-TOOTH (STANDARD SPEED) |
| 24. | N282478 | [1] | Spur Gear | 20-TOOTH (STANDARD SPEED)(PWR SHFT SPROCKET) |
| N218700 | [1] | Spur Gear | 13-TOOTH (HALF SPEED) | |
| N282479 | [1] | Spur Gear | 13-TOOTH (HALF SPEED) | |
| 25. | 34H336 | [1] | Spring Pin | 5/16" X 2-1/4" |
| 25. | N281171 | [1] | Groove Pin | |
| 25. | 34H331 | [1] | Spring Pin | 5/16" X 1-1/2" |
| 26. | N210883 | [1] | Locking Collar | |
| 26. | N282480 | [1] | Hub | |
| 27. | N280201 | [1] | Washer | |
| 27. | 24H1459 | [1] | Washer | 1-1/32" X 2-1/4" X 1/4" |
| 28. | 03H1268 | [3] | Bolt | 5/16" X 3/4" |
| 29. | N162644 | [2] | Pressed Flanged Housing | |
| 30. | N162449 | [2] | Bearing | SPLIT |
| 31. | N161672 | [1] | Snap Ring | |
| 32. | AN280050 | [1] | Chain Sprocket | 34-TOOTH, 1.52" END OF HUB TO SPROCKET FACE |
| 32. | AN281207 | [1] | Chain Sprocket | 34-TOOTH, 1.28" END OF HUB TO SPROCKET FACE |
| 32. | N282482 | [1] | Tube | |
| 33. | 24H1287 | [1] | Washer | 9/32" X 5/8" X 0.065" |
| 33. | 24H1731 | [1] | Washer | 17/64" X 5/8" X 0.035" |
| 34. | N284056 | [1] | Clutch | (SUB FOR N162066) |
| 35. | N160006 | [2] | Washer | |
| 36. | N219980 | [2] | Cam | (SUB FOR N211053) |
| 37. | N161558 | [1] | Support | |
| 38. | N112200 | [4] | Self-Locking Screw | |
| 38. | N112200 | [2] | Self-Locking Screw | |
| 39. | N10213 | [4] | Lock Nut | |
| 39. | K40002 | [2] | Lock Nut | |
| 40A. | N218650 | [1] | Plate | |
| 40B. | N281092 | [1] | Plate | CLUTCH |
| 41A. | N219723 | [1] | Strap | |
| 41B. | N281093 | [1] | Strap | CLUTH |
| 42. | K40002 | [AR] | Lock Nut | |
| 43A. | N219724 | [1] | Angle | |
| 43B. | N281126 | [1] | Arm | |
| 44. | K40014 | [2] | Lock Nut | |
| 44. | N61708 | [2] | Nut | |
| 45A. | A11087 | [1] | U-Bolt | |
| 45B. | N240633 | [1] | U-Bolt | |
| 46. | 19H1849 | [1] | Cap Screw | 5/16" X 1-1/4" |
| 47. | 24H1224 | [2] | Washer | 11/32" X 1" X 1/16" |
| 48. | 19H1901 | [1] | Cap Screw | 5/16" X 2" |
| 49. | 28H1883 | [2] | Spacer | 0.364" X 0.540" X 1/2" |
| 50. | N161580 | [1] | Spur Gear | 28-TOOTH (STD SPEED)(FLUTED MTR SHFT SPRKT) |
| 51. | N120831 | [1] | Spacer | USE WITH 20 X 6" RH, 25 X 6" RH, 15 X 10" RH, 16 X 7.5" CTR AND 20 X 7.5" LH OPENERS ONLY |
