CUTTERBAR DRIVE (RIGID)
Parts on group CUTTERBAR DRIVE (RIGID):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 14M7276 | [AR] | Nut | M16 |
| 2. | 24H1373 | [1] | Washer | 21/32" X 1-9/16" X 0.180" |
| 3. | H94510 | [1] | Spring | |
| 4. | N118600 | [1] | Spacer | |
| 5. | H171659 | [1] | Gauge | |
| 6. | H129208 | [1] | Pivot | |
| 7. | 14M7299 | [AR] | Flange Nut | M12 |
| 8. | AH210916 | [1] | Pin | (SUB FOR AH201407) |
| 9. | 19M7788 | [3] | Screw | M12 X 25 |
| 10. | H171061 | [2] | Bushing | |
| 11. | AA5607R | [2] | Seal | |
| 12. | P46402 | [2] | Snap Ring | |
| 13. | AH201433 | [1] | Idler | |
| 14. | H204589 | [1] | Eyebolt | |
| 15. | 14M7291 | [2] | Flange Nut | M16 |
| 16. | AH97031 | [1] | Idler | (SUB FOR AH165366) |
| 17. | 19M7826 | [1] | Screw | M16 X 70 |
| 18. | H204591 | [1] | Bushing | |
| 19. | 24H1373 | [1] | Washer | 21/32" X 1-9/16" X 0.180" |
| 20. | H84374 | [1] | Bushing | 16.662 X 34.925 X 12.700 MM (21/32" X 1-3/8" X 1/2") (SUB FOR P50273) |
| 21. | AH201252 | [1] | Idler | |
| 22. | 11M7030 | [1] | Cotter Pin | 5 X 40 MM |
| 23. | HXE38943 | [1] | Pulley | (15?, 18?, 20?, 22?, 25?, 30?), SUB FOR AH201561 |
| 23. | AH209769 | [1] | Pulley | |
| 23. | HXE22628 | [1] | Pulley | 35?, SUB FOR H221001, DEEP GROOVE – ?C” SECTION |
| 23. | AH216410 | [1] | Pulley | 246 MM (SLOWDOWN OPTION) |
| AH216411 | [1] | Pulley | 239 MM (SLOWDOWN OPTION) | |
| 24. | 14M7252 | [1] | Nut | M20 |
| 25. | H202647 | [1] | V-Belt | (SUB FOR H138762, H138761) |
| 25. | H221324 | [1] | V-Belt | (SUB FOR H210001) EXTENDED CUTTERBAR |
| 25. | H210003 | [1] | V-Belt | RETRACT AND MIDDLE CUTTINGBAR |
| 26. | 14M7286 | [AR] | Nut | M16 |
| 27. | Z77577 | [1] | Bracket | |
| 28. | 03M7191 | [AR] | Bolt | M10 X 25 |
| 29. | 14M7291 | [1] | Flange Nut | M16 |
| 30. | H91305 | [1] | Handle | |
| 31. | H209636 | [1] | Channel | |
| 32. | 14M7286 | [AR] | Nut | M16 |
| 33. | 19M8043 | [4] | Cap Screw | M16 X 140 |
