SECONDARY COUNTERSHAFT AND CLEANING FAN DRIVE ADJUSTMENT
Parts on group SECONDARY COUNTERSHAFT AND CLEANING FAN DRIVE ADJUSTMENT:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | H76283 | [1] | Arm | |
| 1. | H86132 | [1] | Arm | |
| 2. | 19H1907 | [1] | Cap Screw | 5/16" X 2-3/4" |
| 2. | 14H785 | [1] | Nut | 5/16" |
| 3. | 24H1136 | [1] | Washer | 11/32" X 11/16" X 0.065" |
| 4. | 28H1511 | [2] | Washer | 0.364" X 0.540" X 1/4" |
| 5. | 28H1517 | [1] | Washer | 0.493" X 0.675" X 1/4" |
| 6. | AH75582 | [1] | Ring | |
| 7. | 19H1849 | [1] | Cap Screw | 5/16" X 1-1/4" |
| 7. | 14H785 | [1] | Nut | 5/16" |
| 8. | 19H1800 | [2] | Cap Screw | 3/8" X 1-1/2" |
| 8. | 14H812 | [2] | Nut | 3/8" |
| 8. | 19H1792 | [3] | Cap Screw | 1/2" X 1" |
| 8. | 14H1040 | [2] | Nut | 1/2" |
| 9. | AH75580 | [1] | Yoke | (SUB H86146, H86147, (2) 14H1040, (2) 19H2926 AND (4) 24H1882) |
| 9. | H86146 | [1] | Yoke | (SUB H97503) |
| 9. | H97503 | [1] | Arm | UPPER HALF |
| 10. | P43363 | [1] | Snap Ring | |
| 11. | AH75576 | [1] | Thrust Bearing | (SUB AH87207) |
| 11. | AH87207 | [1] | Thrust Bearing | |
| 12. | JD7798 | [1] | Lubrication Fitting | NLA |
| 13. | 34H372 | [1] | Spring Pin | 1/2" X 2-1/4" (SUB N137598, THIS APPLICATION) |
| 13. | N137598 | [1] | Spring Pin | (USE WITH AH173724) |
| 13. | H100796 | [1] | Spring Pin | (USE WITH AH173726) |
| 14. | AH173726 | [1] | Half Sheave | (INCLUDES JD7798, A4730R AND H100795) |
| 14. | AH173724 | [1] | Pulley | CLEANING FAN DRIVE (OUTER) (SUB FOR AH87208 OR AH100016) |
| 15. | A4730R | [1] | O-Ring | |
| 16. | H80390 | [1] | Half Sheave | CLEANING FAND DRIVE (INNER) |
| 17. | H80389 | [1] | Chain Sprocket | (SHOE AND STRAW WALKER DRIVE) (SUB AH84243) |
| 17. | AH84243 | [1] | Chain Sprocket | 15 TEETH (SHOE AND STRAW WALKER DRIVE) |
| 17. | AH87249 | [1] | Chain Sprocket | 15 TEETH DOUBLE (SHOE AND STRAW WALKER DRIVE) |
| 18. | 22H836 | [2] | Set Screw | 3/8" X 1" |
| 19. | 14H732 | [1] | Nut | 3/8" |
| 20. | 22H775 | [1] | Set Screw | 5/16" X 1/4" |
| 21. | JD8551 | [2] | Eccentric Locking Collar | |
| 22. | E10018 | [4] | Pressed Flanged Housing | |
| 23. | JD9401 | [2] | Ball Bearing | |
| 23. | JD9246 | [2] | Ball Bearing | |
| 24. | 19H1731 | [6] | Cap Screw | 3/8" X 1" |
| 24. | 14H812 | [6] | Nut | 3/8" |
| 25. | AH75985 | [1] | Pulley | 245 MM (9-5/8") DIA. (CLEAN GRAIN AND DIP AND POUR ELEVATOR DRIVES) |
| 26. | 19H2127 | [4] | Cap Screw | 5/16" X 7/8" |
| 27. | AH75978 | [1] | Pulley | (SUB AH92104) |
| 27. | AH92104 | [1] | Pulley | 508 MM (20") DIA. |
| 28. | 22H853 | [2] | Set Screw | 3/8" X 7/8" |
| 29. | 14H732 | [1] | Nut | 3/8" |
| 30. | H77020 | [1] | Pulley | 162 MM AND 211 MM (6-3/8" AND 8-19/64") DIAS. (TAILINGS AUGER AND SHOE GRAIN SUPPLY AUGERS DRIVE) |
| 31. | [1] | Key | 6 MM X 6 MM X 127 MM (1/4" X 1/4" X 5") (CUT FROM H64374 IN AH64587 KEY STOCK KIT) | |
| 32. | H76277 | [1] | Jackshaft | |
| 33. | H76282 | [1] | Pin Fastener | |
| 34. | [1] | Key | 6 MM X 6 MM X 381 MM (1/4" X 1/4" X 1-1/2") (CUT FROM H64374 IN AH64587 KEY STOCK KIT) | |
| 35. | AH75581 | [1] | Yoke | (SUB H86147, H86146, (2) 14H1040, (2) 19H2926 AND (4) 24H1882) |
| 35. | H86147 | [1] | Yoke | LOWER HALF |
| 36. | 14H1008 | [2] | Nut | 3/8" |
| 37. | N13224 | [1] | Shaft Key | |
| 38. | 24H1682 | [1] | Washer | 13/32" X 7/8" X 0.120" |
| 39. | AH75577 | [1] | Bolt | |
| 40. | 24H1882 | [4] | Washer | 17/32" X 3/4" X 0.060" |
| 41. | 19H2926 | [2] | Screw | 1/2" X 1" |
