700 - GRINDER, MIXER HAMMER MILL AND FAN [B21] EPC John Deere AN103005 AG online

HAMMER MILL AND FAN [B21]

Pos.	Part No	Qty	Parts name	Comments
1.	AN103005	[1]	Shaft Key
2.	N105024	[1]	Sheave	(8 GROOVES) (540 ROM) (121.4 MM (4.78") DIA.)
2.	N105025	[1]	Sheave	(6 GROOVES) (1000 RPM) (210.8 MM (8.30") DIA.)
3.	19H1708	[3]	Cap Screw	5/8" X 1-3/4"
4.	12H294	[3]	Lock Washer	5/8"
5.	JD9428	[1]	Eccentric Locking Collar	WITH 22H821 SET SCREW
6.	JD7778	[1]	Lubrication Fitting	30°, 1/8"
7.	JD9429	[1]	Ball Bearing
8.	AN103509	[1]	Bearing	FRONT
9.	N108140	[1]	Plate
10.	N105010	[9]	Plate
11.	N105572	[8]	Snap Ring
12.	N105106	[1]	Pin
13.	N105979	[64]	Bushing	SPACERS, HAMMERS
14.	C17199	[AR]	Strap	HAMMERS, (64 USED WITHOUT HAY ATTACHMENT) (48 USED WITH HAY ATTACHMENT)
15.	N105013	[1]	Washer	SPACER, END, REAR
16.	N105014	[1]	Nut	ROTOR SHAFT
17.	JD7797	[1]	Lubrication Fitting	1/4"
18.	M16018	[1]	Threaded Nipple
19.	JD9430	[1]	Ball Bearing
20.	AN103510	[1]	Bearing
21.	N107485	[1]	Fan
22.	19H1815	[4]	Cap Screw	1/2" X 1-1/4"
23.	12H301	[36]	Lock Washer	1/2"
24.	J19025	[1]	Nut	19.050 MM (3/4")
25.	11H240	[1]	Cotter Pin	5/32" X 1-1/2"
26.	N105011	[1]	Shaft
27.	N105012	[8]	Bushing
28.	19H1731	[2]	Cap Screw	3/8" X 1"
29.	12H304	[2]	Lock Washer	3/8"
30.	14H812	[2]	Nut	3/8"
31.	14H794	[2]	Nut	3/4"
32.	N107581	[1]	Eyebolt
33.	19H1847	[1]	Cap Screw	5/8" X 2-1/2"
34.	AN103488	[1]	Belt Set	(MATCHED) (1000 RPM) (3-GROOVE)
34.	AN103487	[1]	Belt Set	(MATCHED) (540 RPM) (4-GROOVE)
35.	N172130	[AR]	Grinder Hammer	HAMMER, (SUB FOR N108138) (16 USED WITH HAY ATTACHMENT)
36.	19H1792	[32]	Cap Screw	1/2" X 1", (32 USED WITH HAY KNIFE)
37.	14H1040	[32]	Nut	1/2"
38.	N112396	[1]	Washer	25/32" X 1-5/8" X 0.180"
39.	24H1161	[1]	Washer	13/16" X 1-15/32" X 0.134"