BRUSH ROLLS
Parts on group BRUSH ROLLS:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 19M7785 | [12] | Screw | M10 X 25 |
| 2. | N125408 | [6] | Retainer | |
| 3. | AN50701 | [3] | Brush | |
| 4. | AN50702 | [3] | Brush | |
| 5. | AN123046 | [3] | Flap | 40" (1016 MM) |
| 5. | AN123821 | [AR] | Flap | 2-PLY |
| 5. | AN220018 | [3] | Brush | 40" BRUSH BAT ASSY |
| 6. | N223716 | [12] | Set Screw | |
| 7. | E63526 | [12] | Nut | |
| 8. | N220623 | [4] | Hub | |
| 9. | N222272 | [3] | Spacer | SUB FOR N125581 |
| 10. | 19M7803 | [1] | Screw | M8 X 70 |
| 11. | E63525 | [1] | Nut | |
| 12. | N220365 | [1] | Paddle | |
| 13. | N220156 | [1] | Spacer | |
| 14. | 34H334 | [1] | Spring Pin | 5/16" X 2" |
| 15. | N220491 | [1] | Stud | |
| 16. | A31870 | [1] | Lock Nut | |
| 17. | N231749 | [1] | Washer | |
| 18. | 19M7784 | [4] | Screw | M10 X 20 |
| 19. | N220543 | [1] | Hub | (SUB N222811) |
| 19. | N222811 | [1] | Gear | |
| 20. | N222810 | [1] | Gear | (SUB FOR N220532 OR N222811) |
| 21. | 19M7784 | [3] | Screw | M10 X 20 |
| 22. | M82222 | [3] | Lock Nut | |
| 23. | E10018 | [2] | Pressed Flanged Housing | |
| 24. | AN220534 | [1] | Ball Bearing | |
| 25. | 24H1938 | [1] | Washer | 1-5/32" X 2-1/4" X 1/4" |
| 26. | N127337 | [2] | Cap | |
| 27. | N15764 | [1] | Pressed Flanged Housing | |
| 28. | JD8673 | [1] | Ball Bearing | |
| 29. | N126115 | [1] | Pressed Flanged Housing | |
| 30. | N220157 | [1] | Support | |
| 31. | J21444 | [1] | Bushing | |
| 32. | 19M8162 | [1] | Screw | M10 X 40 |
| 33. | 19M7785 | [1] | Screw | M10 X 25 |
| 34. | 03M7192 | [1] | Bolt | M10 X 30 |
| 35. | 24H1307 | [1] | Washer | 13/32" X 1" X 1/16" |
| 36. | AH116104 | [1] | Sensor | |
| 37. | 14H904 | [2] | Nut | 3/4" |
| 38. | N221405 | [1] | Angle | (SUB FOR N220544) |
| 39. | N220890 | [1] | Angle | SENSOR ADJUSTMENT GAUGE |
| 40. | N220678 | [1] | Template | BRUSH ROLL/AUGER ALIGNMENT |
| 41. | N221158 | [1] | Angle | RH BOLL SHIELD |
| 41. | N221159 | [1] | Angle | LH BOLL SHIELD (ILLUSTRATED) |
