Upper Cleaner Saws And Cross Auger Clutch Assembly (30001 - )
Parts on group Upper Cleaner Saws And Cross Auger Clutch Assembly (30001 - ):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | N221496 | [2] | Ring | |
| 2. | N222465 | [2] | Seal | (FOAM) |
| 3. | AN220364 | [1] | Shaft | (INCLUDES N157017) |
| 4. | N220430 | [AR] | Screw | NO. 10 X 1/2" |
| 4. | N166555 | [AR] | Screw | NO. 12 X 1/2" OVERSIZED SCREW (USE ONLY WHEN HOLES MUST BE DRILLED OUT) |
| 5. | N221590 | [98] | Saw | |
| 6. | N157017 | [1] | Snap Ring | |
| 7. | AN220672 | [2] | Ball Bearing | |
| 8. | AN220732 | [1] | Saw | |
| 9. | N125300 | [4] | Spring | |
| 10. | N222500 | [2] | Plate | |
| 11. | N222499 | [1] | Disk | |
| 12. | N381419 | [1] | Cover | |
| 13. | AN220646 | [2] | Bearing With Housing | |
| 14. | N280156 | [1] | Spacer | |
| 15. | JD8594 | [1] | Eccentric Locking Collar | |
| 16. | N221396 | [2] | Lubrication Fitting | |
| 17. | A31867 | [4] | Lock Nut | |
| 18. | AN122853 | [1] | Pulley | |
| 19. | N128676 | [1] | Hub | |
| 20. | T20034 | [1] | Bushing | |
| 21. | AN123128 | [1] | Hub | |
| 22. | N221993 | [1] | Plate | |
| 23. | N221610 | [1] | Hub | |
| 24. | N221611 | [1] | Retainer | |
| 25. | N231749 | [1] | Washer | |
| 26. | A31870 | [1] | Lock Nut | |
| 27. | N220829 | [1] | Screw | |
| 28. | N381373 | [1] | Washer | |
| 29. | N220366 | [4] | Tone Wheel | 60T TONE |
| 30. | AN221781 | [1] | Wiring Harness | |
| 31. | RE519144 | [1] | Sensor | |
| 32. | 51M7044 | [1] | O-Ring | 17.300 X 2.200 MM |
| 33. | 03M7195 | [4] | Bolt | M10 X 45 |
| 34. | E63526 | [4] | Nut | |
| 35. | 24H1494 | [2] | Washer | 1-9/32" X 1-3/4" X 0.134" |
| 36. | 14M7257 | [1] | Nut | M20 |
| 37. | AN220883 | [2] | Drum | |
| 38. | N282054 | [1] | Washer |
