VERTICAL AUGER LOWER GEAR CASE
Parts on group VERTICAL AUGER LOWER GEAR CASE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | H215085 | [1] | Shaft | (SUB FOR H96169) |
| 2. | N34753 | [AR] | Shaft Key | |
| 3. | AH90963 | [1] | Seal | |
| 4. | N71921 | [2] | Snap Ring | |
| 5. | AH96585 | [2] | Ball Bearing | |
| 6. | H96267 | [1] | Compression Spring | |
| 7. | H96149 | [1] | Bushing | |
| 8. | JD8524 | [2] | Ball Bearing | |
| 9. | H113053 | [1] | Bearing Housing W/O Bearing | |
| 10. | 19M7786 | [AR] | Screw | M10 X 30 |
| 11. | H129716 | [2] | Washer | |
| 12. | 19M7843 | [2] | Screw | M16 X 35 |
| 13. | AH138955 | [1] | Shim Kit | |
| 14. | H96294 | [2] | Gear | Z = 23 |
| 15. | H130137 | [1] | Housing | |
| 16. | 24H1533 | [2] | Shim | |
| 17. | 24H1433 | [1] | Washer | 29/32" X 2-1/4" X 1/4" |
| 18. | H149361 | [1] | Lock Nut | (FOR H215085) |
| 18. | H113238 | [1] | Flange Nut | (FOR H96169) |
| 19. | JD7759 | [1] | Lubrication Fitting | |
| 20. | H129653 | [1] | Shaft | |
| 21. | AH125080 | [1] | Drive Sprocket | Z = 46 |
| 21. | AH146352 | [1] | Drive Sprocket | Z = 40 |
| 21. | AH173944 | [1] | Chain Sprocket | (FOR ADJUSTABLE CROSS AUGER COVER) Z= 34 |
| 22. | 14M7296 | [AR] | Flange Nut | M10 |
| 23. | 19M7382 | [AR] | Cap Screw | M10 X 40 |
| 24. | H135192 | [1] | Seal | FRONT |
| 25. | H136572 | [1] | Cover | FRONT |
| 26. | H135193 | [1] | Seal | REAR |
| 27. | H136573 | [1] | Cover | REAR |
| 28. | 24M7178 | [5] | Washer | 10.500 X 30 X 2.500 MM |
| 29. | 21M7236 | [5] | Wing Screw | M10 X 16 |
| 30. | 19M7786 | [AR] | Screw | M10 X 30 |
| 31. | AZ103401 | [1] | Shield | (SUB FOR H177230, AH211068, AH213670) |
| 32. | 24M7239 | [3] | Washer | 10.700 X 21 X 2.500 MM |
| 33. | 25M3827 | [1] | Groove Pin | 3 X 8 MM |
Parts catalog 130 ELEVATORS, GRAIN TANK, UNLOADING AUGER:
HORIZONTAL UNLOADING AUGER SWIVEL
130 ELEVATORS, GRAIN TANK, UNLOADING AUGER part catalog John Deere
