DE19766 John Deere Gear Case

New Replacement Gearbox Compatible Replacement for John Deere Code DE19766 / DE19104, Fits MX5 and MX6 Rotary Cutters. Replacement for The Early Model Gearbox with a hex Bolt Mounted Stump Jumper.
Brooks AG Parts Fits MX5 and MX6 (Both Left and Right Hand Side) mowers that use a bolt to mount the blade carrier to the gearbox, will not fit mowers that use a castle nut to mount the blade carrier. || 1:1.46 Speed Up Ratio (22 tooth input gear and 15 tooth output gear) High Speed Tapered Roller Bearings and Heat Treated Gears and Shafts || 1-3/8" Diameter Input shaft with 21 splines, 1.97" Diameter Output Shaft with 15 tapered Splines || (6) 3/4" Mounting Holes on a 8" Bolt Circle (only 4 are used the other 2 are for other applications) || Center of Input Shaft to base flange is 7.06", Output Shaft length from Base Flange is 8.50" || Shipped Dry Please add 80-90W gear lube before using

New Gearbox Compatible Replacement for John Deere Code DE19030 / DE19768 fits MX10 Rotary Cutters with Iberica (Spanish) gearboxes. These gearboxes us a Bolt to Hold The Blade Carrier on
Brooks AG Parts Fits MX10 (Both Left and Right Hand Side) mowers that use a bolt to mount the blade carrier to the gearbox, will not fit mowers that use a castle nut to mount the blade carrier. || 1:1.22 Speed Up Ratio (22 tooth input gear and 18 tooth output gear) High Speed Tapered Roller Bearings and Heat Treated Gears and Shafts || 1-3/8" Diameter Input shaft with 21 splines, 1.97" Diameter Output Shaft with 15 tapered Splines || (6) 3/4" Mounting Holes on a 8" Bolt Circle (only 4 are used the other 2 are for other applications) || Center of Input Shaft to base flange is 7.06", Output Shaft length from Base Flange is 8.50" || Shipped Dry Please add 80-90W gear lube before using

New Replacement Gearbox Compatible Replacement for John Deere Code DE19766 / DE19104, Fits MX5 and MX6 Rotary Cutters. Replacement for The early model gearbox with a hex bolt mounted stump jumper.
Brooks AG Parts Fits MX5 and MX6 (Both Left and Right Hand Side) mowers that use a bolt to mount the blade carrier to the gearbox, will not fit mowers that use a castle nut to mount the blade carrier. || 1:1.46 Speed Up Ratio (22 tooth input gear and 15 tooth output gear) High Speed Tapered Roller Bearings and Heat Treated Gears and Shafts || 1-3/8" Diameter Input shaft with 21 splines, 1.97" Diameter Output Shaft with 15 tapered Splines || (6) 3/4" Mounting Holes on a 8" Bolt Circle (only 4 are used the other 2 are for other applications) || Center of Input Shaft to base flange is 7.06", Output Shaft length from Base Flange is 8.50" || Shipped Dry Please add 80-90W gear lube before using